01425 508 474Blum Servo Drive For Pullboy-Z Waste Bins
Product No.
Z10BMT543
This mains operated Servo Drive provides effortless opening for Wesco Pullboy-Z bins. A slight push on the cabinet door results in the bin being smoothly pushed out into the kitchen. A perfect solution for the latest trend of handle-less kitchen units.
Please note that the Servo Drive requires an additional fitting depth of 37mm at the back of the runners - so for a typical 500mm deep Pullboy-Z bin an overall depth of 540mm is required.
(NB This unit will only work with Wesco Pullboy-Z bins and unfortunately is not compatible with Hailo, Vauth-Sagel or Ninka bins).
This Blum Servo Drive is designed to work with their Legrabox and Tandembox drawer units which carry the Wesco Pullboy-Z bins.
The unit is supplied with a standard UK 3 pin plug and your socket should ideally be located above or below the bin.
The Servo drive unit attaches to the Blum runners at the rear of the bin and then two pressure sensors fit just behind the cabinet door. When the door is gently touched the servo drive pushes the bin out into the room.
Supplied to fit Pullboy-Z bins for 600mm doors it can be readily adapted for 500mm, 450mm, and 400mm units.
Note: The Servo Drive requires and additional 37mm of fitting space in addition to the runners.
| Delivery | FREE NEXT DAY DELIVERY (Mon-Fri) - order before 4.00pm |
|---|---|
| Brand | Blum |
| Product Number | Z10BMT543 |
| Colour | n/a |
| Warranty | 12 months manufacturer’s warranty |
There are currently no reviews for this product but to see our latest service reviews, please click here Read all reviews
