chevron_left chevron_right
Eco-friendly 40L in-cupboard recycling bin with 2 compartments and soft-close lid.
ECO 2-Compartment 40L Recycler: 400mm Door

We have answers!

Questions?

Can?t find the answer you?re looking for? Visit our FAQs or chat with our friendly team

How do I measure my cabinet for a in-cupboard bin?

When you’re choosing an in-cupboard bin, you’ll first need to establish three key Internal cabinet measurements that’ll indicate which bin you can fit. These are:

  • Internal Width - Interior width of the cabinet carcass, usually 32-38mm less than the door width, but please note this can vary.
  • Internal Height - Consider the max. available height of your cabinet, including any obscurations, eg. a drawer above, pipes.
  • Internal Depth - Consider the max. available depth from the back of the cabinet panel or wall, to the back of the cabinet door. This is important because depth is the dimension which varies most across cabinets and also bin models.

We stock an extensive range of products to fit numerous cabinet sizes, so provided your own measurements are accurate, you should have no problem finding a bin to fit your cupboard and needs.

Can I convert a hinged door cabinet to a pull-out door?

It is often possible to remove a door from its hinges so that it becomes a panel to apply to the front of a bin unit for pull-out doors, or vice versa if you are looking to install a bin for hinged doors. If you have an existing side handle, you can alter the handle position, or create a routing or top groove for pulling out. This will help over many years as pull-out bins are best pulled out from the centre to balance the pressure on each runner.

You can ask your kitchen fitter to see if this will work for your cabinet, or if you are an avid DIY'er, you can do so yourself! Make sure to double check your cabinet dimensions to find the right product for your cabinet.

My cabinet is a non-standard size, what can I do?

Non-standard internal width

The internal width of a cabinet is the key dimension in determining which pull-out bin unit you can fit. If you have a bespoke or unusual internal width, you need to re-create the internal fitting width given for the product, by strongly battening or lining the internal sides to achieve the correct bin fitting width as specified on the product page.

Issues with Internal depth and height

If you have a restricted depth front to back, or lower height, there are many bin options with shorter fitting depths or lower heights. Remember, if it appears that your internal depth is not enough to fit the bin you’re interested in, it can be possible to remove all or part of a back panel in order to free up more depth. 

I have an in-frame cabinet: how do I fit a pull-out bin?

The key dimension here is the width of the ‘exit’ through the frame, which will be the door width. Because the bin unit needs to pull out through the frame, this width will determine the size of the bin unit to fit.

If the internal cabinet width is wider than the width of the frame/door, you will need to line or batten the inside cabinet sides to achieve the correct fitting width for the bin model.

For example, if you have a 600mm base unit with a framed door, you will likely need a bin unit from the section for ‘500mm doors’, because these will fit to an internal width of 462-468mm and therefore should pull out through the frame.

One point to check here is with doors which may have a thinner central panel – if the door has a thicker surround, this needs to be wide enough to accommodate secure fixing of the door brackets.

The Binopolis difference

Award winning customer care:

When you choose our services, you can expect expert help and advice every step of the way. We pride ourselves on providing Feefo Platinum award-winning customer service, a distinction we have maintained for eight consecutive years. Our commitment to excellence is reflected in our impressive Feefo rating of 4.9 out of 5. Rest assured that even after your purchase, we offer reliable post-purchase support and care.

Only the best products:

We hold the highest regard for quality and design, ensuring that we bring you only the best products. Our collection comprises Europe's leading brands, each known for their superior craftsmanship, design and innovation. Additionally, our products come with extensive manufacturer warranties, a testament to the quality commitments of our manufacturers, and giving you peace of mind. We take climate considerations seriously, aiming to select products that are manufactured in an environmentally conscious manner with have post-life considerations.

Effective service:

Our goal is to provide fast and efficient service from the moment you place your order. We partner with leading couriers to ensure prompt delivery, and most deliveries have comprehensive tracking updates, so you're always informed about the status of your delivery. To make installation a breeze, in-cupboard products come with fitting templates, or we provide you clear fitting notes. When it comes to payments, we prioritise security and offer a fast and user-friendly checkout process.

Do not hesitate to reach out to our friendly customer service team if you have any queries about our products or service.

Hear from our customers

Product Reviews

We are proud to provide industry leading service and expertise, and love to hear from our customers. You can also find us on Trustpilot (link opens in new tab/window) and Google Reviews (link opens in new tab/window).